PromptPartner DE

Guide

What the 2027 Machinery Regulation means for your instructions for use

The new EU Machinery Regulation allows instructions for use in digital form, under conditions. If you use this, you need the right version for every machine you deliver, and an AI agent can prepare it.

Draft: instructions, machine 0815Illustration with sample data
  1. Safety chapterModule, version 4
  2. DriveSupplier's manual
  3. Control systemModule, version 2
  4. Open: cooling unitversion missing

Approved by your technical writers

From 20 January 2027 the EU Machinery Regulation (EU) 2023/1230 applies. It replaces Machinery Directive 2006/42/EC and allows the instructions for use, the operating manual, to be provided in digital form. The conditions are in Article 10(7), and among other things the instructions must be possible to print, download and save.

If you use the digital form, in practice you have to keep the right, current version of the instructions findable for every machine you've delivered. This guide sums up what official sources say and is no substitute for legal advice. For how it applies in a specific case, ask your specialist body or your trade association.

What changes on 20 January 2027

European Commission. Machinery Regulation (EU) 2023/1230 was adopted on 14 June 2023 and applies from 20 January 2027. Machinery placed on the EU market before that date must comply with Machinery Directive 2006/42/EC.[1]

Source: European Commission, page “Machinery”

  1. 14 June 2023

    Regulation (EU) 2023/1230 is adopted.[1]

  2. 19 July 2023

    It enters into force.[2]

  3. 19 September 2025

    The Federal Council opens the consultation on the revised Swiss Machinery Ordinance.[5]

  4. 20 January 2027

    The EU regulation applies, and Directive 2006/42/EC is repealed.[1][2]

On digital instructions, Article 10(7) sets out these points, among others:

  • The manufacturer states how the digital instructions can be accessed.[2]
  • The format allows the instructions to be printed, downloaded and saved on a device, so they are available at all times, especially when the machine breaks down.[3]
  • This also applies when the instructions are embedded in the machine's software.[3]
  • Where non-professional users may use the machine, the essential safety information is still supplied on paper.[3]

The remaining conditions are in the wording of Article 10(7) and in Annex III. The binding text is the one in the Official Journal of the EU, L 165 of 29 June 2023, as corrected. A corrigendum to the German wording is in Council document 12744/24 of 18 March 2025.[3]

Germany sets the language in a law of its own, the Machinery Regulation Implementation Act (Maschinenverordnung-Durchführungsgesetz) of 2 December 2025. It requires the instructions in German and, for the digital form, also the note on how to access them. These rules apply from 20 January 2027.[4]

What applies to Swiss manufacturers?

On 19 September 2025 the Federal Council opened the consultation on the revised Machinery Ordinance (MaschV). The Swiss ordinance is to be aligned with EU Regulation 2023/1230 so that easier access to the EU single market is kept.[5] The press release gives no date for entry into force.

If you deliver machines to the EU, the EU regulation applies there from 20 January 2027. SECO gives the same date on its page on machinery.[6]

What you have in hand for each machine

The regulation allows the digital form; the work lies in the documentation itself. A set of instructions is built from many parts: modules for each assembly, suppliers' manuals for motors and control systems, translations, changes after modifications.

An AI agent can prepare this work. At the end there's a draft of the right version for each machine number, ready to print and save, with anything missing from your checklist marked. This is how it comes together:

  1. The agent reads machine type, variant, options and destination country from the order.
  2. It gathers the matching modules and the suppliers' manuals for this machine.
  3. It checks whether every mandatory part of your checklist is there and current, and marks what's missing.
  4. It files the version for the machine number as a draft.

Your technical writers or the responsible design engineer check the draft and approve it. Only then is the version published.

What the regulation requires goes into your checklist, which your firm keeps up to date with its specialist body.

More on AI agents for machine builders

What has to be in order first

The digital version is only as good as the filing behind it. These five points come at the start:

  • All instructions in one place. With version and date, including the older versions.
  • Machine number, variant, instructions. A list of which version belongs to which delivered machine.
  • Current supplier documents. With the date you last checked them.
  • A checklist of mandatory content. From Annex III of the regulation and your standards, kept up to date by one person in charge.
  • A fixed place for the digital version. An address that doesn't change when you rebuild your website.

What your software can already do

If you have a PDM or technical documentation system, first check whether it maps variants and versions per machine number. If it does, perhaps only the step from the order to the finished version is missing. In the trial run we put in writing what your software already does on its own.

More guides

Questions about the Machinery Regulation

Do we have to supply the instructions in digital form from 2027?

The regulation allows the digital form under conditions, and whether you use it is your decision. Where non-professional users may use the machine, the essential safety information is still supplied on paper.

Does this also apply to machines we've already delivered?

The European Commission writes that machinery placed on the EU market before 20 January 2027 must comply with the previous directive. For individual cases such as modifications, ask your specialist body.

Does the EU regulation also apply in Switzerland?

Switzerland has its own Machinery Ordinance. The Federal Council wants to align it with the EU regulation and opened the consultation on this in September 2025. For deliveries to the EU, the EU regulation applies there.

You see whether it fits on cases you've already finished.

In the trial run we make our drafts for those cases and put them next to yours. You see where they match, where they differ and what data is missing, and then you decide.

How the trial run works